 |
|
|
 |
|
|
|
|
![]() |
|
| by kenn on 9/20/2005 02:21:00 PM |
|
|
Quik Tipz: Secret Techniques for EQ'n Drumz
Source:
When it comes to equalizing your drums, don't mess around. The drums represent the heart of your mix & should be treated with respect. Below are some invaluable secrets from ModernBeats for EQ'n drums for Hip Hop:
Frequency Selection - If your serious about obtaining a clean and punchy sound for your drums, then you'll quickly learn you must be selective in the frequencies you should to boost and cut for each drum track. Most important to remember - Avoid accumulation of the same frequencies. Particularly, avoid over boosting low end frequencies. This will only muddy up your drums, as well as, mask other important tracks in the mix. Ensure your drum frequencies are even across the board!
Clean it Up - To achieve an overall punchier & cleaner mix, try cutting low end frequencies between 250 - 500hz on drum tracks such as kicks & toms. Cutting frequencies in this range will actually sharpen up drum tracks that sound too bold, harsh, & up-front. For punch, try adding 250 - 350hz into your snare & clap tracks. This will give more snap & body to the rhythm, as well as, balance out where your cut previously on your kick & tom tracks.
Adding Clarity - Cutting out the low frequencies from 100-200hz on cymbal & hi-hat tracks will add clarity while also allowing the other drum tracks that contain natural lows in those same ranges to come through in the mix. Also, boosting highs from 9khz - 12khz will add brilliance to cymbal tracks & boosting around 8khz will add crackle to your snare & clap tracks. If your not satisfied with the depth & feel on your kick tracks, then add a 4db boost at 40hz using a narrow Q of around 20. This will give the kick tracks the punch you're looking for. But ...don't forget...high pass your sub kick tracks from 34hz & below, canceling out unwanted low end rumble.
Free
Apple iPod Program
|
|
|
|
|
|
|
